Table of Contents
Advertisement
General Installation Process
Install Hard Drives ...continued
A
Remove the drive carrier by pressing the
the lever.
B
Slide the carrier out.
D
Install the hard disk drive using the same four screws as shown. Make
sure the connector end of the drive matches the backplane connector.
Install 2.5" Hard Drive as option:
d1
Break off the tab on the
HDD interface bracket.
d1
0
Drive 0 Primary
3.5" Hard Drive Carrier (For system with 3.5" hard drive bay only)
green
button and opening
B
A
D
d2
Install the HDD interface bracket
from top. Secure the bracket with
three screws as shown.
Hard Drive Numbering Diagram
1
C
Remove the four screws securing the HDD interface bracket and remove
the HDD interface bracket.
E
With the lever open, insert the hard disk drive assembly into the chassis.
F
Push in the lever to lock it into place.
CAUTION: If you do not
install all drives, empty drive
bays must be occupied by
carriers with plastic drive
blank provided to maintain
proper system cooling.
d3
Slide the 2.5" HDD into the
bracket to align the screw holes
with the right and the left rail.
d3
d2
2
6
C
E
F
d4
Secure the hard disk drive using
the four screws for 2.5" HDD.
d4
3
4 x 3.5" hard drive bay as shown
Advertisement
Table of Contents
