Bosch 0 607 450 626 Manual page 18

OBJ_BUCH-281-001.book Page 18 Thursday, October 26, 2006 10:40 AM
Technical Data
Pneumatic Impact Wrench
Article number 0 607 450 ...
No-load speed
Maximum torque, hard screwdriving application
according to ISO 5393
Max. screw dia.
Rotational direction
Tool holder
Locking screw 16
Engine oil, SAE 40
Rated pressure
Connecting thread
Inside hose diameter
Air consumption under load
Weight according to
EPTA-Procedure 01/2003
Assembly
Delivered items
Type 0 607 450 626/... 627/... 628
The impact wrenches are delivered with closing cap and
quick-change nipple provided, but without tool bits.
Type 0 607 450 629
The impact wrench kit contains the impact wrench
0 607 450 628 as well as a spindle extension (90 mm)
and 5 impact sockets (size 14 mm, 17 mm, 19 mm,
21 mm and 22 mm).
18 | English
3/8" 3/8" with 1/2" drive
... 626
rpm 10000
Nm 120
ft-lbs 89
mm 14
3/8"
mm 4.0
ml 15.0
cin 0.9
bar 6.3
psi 91
1/4" NPT
mm 10
in 3/8"
l/s 6.0
cfm 12.7
kg 1.5
lbs 3.3
Connection to the Air Supply
Pay attention that the air pressure is not
below 6.3 bar (91 psi), as the pneumatic tool
is designed for this operating pressure.
For maximum performance, the inner hose diameter
sizes as well as the connection threads must correspond
with the values listed in the table "Technical Data". To
maintain full performance, use only hoses with a maxi-
mum length of 4 meters.
The supplied air must be free of foreign material and
moisture to protect the pneumatic tool from damage,
contamination, and rust.
Note: The use of a compressed air maintenance unit is
necessary. This ensures optimum functioning of com-
pressed air tools.
Observe the operating instructions of the maintenance
unit.
All fittings, connecting lines, and hoses must be dimen-
sioned for the required air pressure and volume.
Avoid restrictions in the air supply resulting from, e.g.,
pinching, kinking, or stretching!
In case of doubt, measure the pressure with a pressure
gauge at the air inlet with the pneumatic tool switched
on.
1/2"
... 627 ... 628
10000 7000
120 310
89 229
14 18
1/2" 1/2"
4.0 4.0
15.0 25.0
0.9 1.5
6.3 6.3
91 91
10 10
3/8" 3/8"
6.0 8.5
12.7 18.0
1.5 2.3
3.3 5.1
3 609 929 B04 • 26.10.06