Lexmark C3224 User Manual page 57

Use printer menus
Wireless
Menu item
Setup Using Mobile App
Setup On Printer Panel
Choose Network
Add Wi‑Fi Network
•
Network Name
•
Network Mode
Infrastructure
•
Wireless Security Mode
Disabled*
WEP
WPA2/WPA - Personal
WPA2 - Personal
Wi‑Fi Protected Setup
Start Push Button Method
Start PIN Method
Enable Wi‑Fi Direct
On
Off*
Compatibility
802.11b/g/n (2.4GHz)
802.11a/b/g/n/ac (2.4GHz/5GHz)*
802.11a/n/ac (5GHz)
Wireless Security Mode
Disabled*
WEP
WPA2/WPA - Personal
WPA2 - Personal
802.1x - RADIUS
WEP Authentication Mode
Auto*
Open
Shared
Set WEP Key
Description
Configure the wireless connection using the Lexmark Mobile
Assistant app.
Determine the wireless network that the printer connects to.
Note: This menu item appears as Wireless Connection Setup in the
Embedded Web Server.
Establish a wireless network and enable network security.
Notes:
•
Start Push Button Method connects the printer to a wireless
network when buttons on both the printer and the access point
(wireless router) are pressed within a given time.
•
Start PIN Method connects the printer to a wireless network
when a PIN on the printer is entered into the wireless settings
of the access point.
Set the printer to connect directly to Wi-Fi devices.
Specify the wireless standard for the wireless network.
Set the type of security for connecting the printer to wireless devices.
Set the type of Wireless Encryption Protocol (WEP) used by the
printer.
Note: This menu item appears only if Wireless Security Mode is set
to WEP.
Specify a WEP password for secure wireless connection.
Note: This menu item appears only if Wireless Security Mode is set
to WEP.
57