Use printer menus
Advanced Imaging
Menu item
Color Balance
Cyan
‑5 to 5 (0*)
Magenta
‑5 to 5 (0*)
Yellow
‑5 to 5 (0*)
Black
‑5 to 5 (0*)
Reset Defaults
Color Correction
Color Correction
Auto*
Off
Manual
Color Correction Content
Color Adjust
Note: An asterisk (*) next to a value indicates the factory default setting.
PostScript
Menu item
Print PS Error
On
Off*
Minimum Line Width
1–30 (2*)
Lock PS Startup Mode
On*
Off
Image Smoothing
On
Off*
Wait Timeout
Disabled
Enabled*
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Adjust the amount of toner that is used for each color.
Modify the color settings used to print documents.
Notes:
•
Off sets the printer to receive the color correction from the software.
•
Auto sets the printer to apply different color profiles to each object on the
printed page.
•
Manual allows the customization of the RGB or CMYK color conversions
applied to each object on the printed page.
•
Color Correction Content is available only when Color Correction is set to
Manual.
Calibrate the printer to adjust color variations in the printed output.
Description
Print a page that describes the PostScript
Note: When an error occurs, processing of the job stops, the printer
prints an error message, and the rest of the print job is flushed.
Set the minimum stroke width.
Note: Jobs printed in 4800 CQ use half the value.
Disable the SysStart file.
Note: The default setting varies depending on the printer model.
Enhance the contrast and sharpness of low‑resolution images.
Note: This setting has no effect on images with a resolution of 300 dpi or
higher.
Enable the printer to wait for more data before canceling a print job.
®
error.
51