Lexmark C3224 User Manual page 53

Use printer menus
Menu item
Auto CR after LF
Off*
On
Auto LF after CR
Off*
On
Tray Renumber
Assign Tray [x]
Off*
None
0–201
Assign Manual Paper
Off*
None
0–201
Assign Manual Envelope
Off*
None
0–201
Tray Renumber
View Factory Defaults
Tray Renumber
Restore Defaults
Print Timeout
Disabled
Enabled* [90]
Print Timeout Time
1–255 (90*)
Note: An asterisk (*) next to a value indicates the factory default setting.
Image
Menu item
Auto Fit
On
Off*
Invert
Off*
On
Note: An asterisk (*) next to a value indicates the factory default setting.
Description
Set the printer to perform a carriage return after a line feed control
command.
Note: Carriage return is a mechanism that commands the printer to move
the position of the cursor to the first position on the same line.
Set the printer to perform a line feed after a carriage return control
command.
Configure the printer to work with print drivers or applications that use
different source assignments for the paper source.
Show the factory default setting assigned for each paper source.
Return all tray assignments to factory default values.
Set the printer to end a print job after it has been idle for the specified
amount of time in seconds.
Note: Print Timeout Time appears only in some printer models.
Description
Select the best available paper size and orientation setting for an image.
Note: When set to On, this menu item overrides the scaling and orientation
settings for the image.
Invert bitonal monochrome images.
Note: This menu item does not apply to GIF or JPEG image formats.
53