4.5.13 System Password; 4.5.14 Firmware Upgrade; Figure 1-24 : System Password; Figure 1-25 : Firmware Upgrade - Aztech DSL600E User Manual

ADSL2+ Ethernet Modem - User Guide

4.5.13 System Password

You can change your ADSL Modem's username and password by clicking on System
Password. You can also change the idle timeout; you will need to log back onto the
ADSL Modem once the timeout expires. If you forget your password, you can press and
hold the reset to factory defaults button for 10 seconds (or more). The ADSL Modem will
reset to its factory default configuration and all custom configurations will be lost. See
Fig 1-24.

Figure 1-24 : System Password

4.5.14 Firmware Upgrade

You can upgrade the ADSL Modem's firmware; click on Firmware Upgrade. To upgrade
the firmware, click browse, find the firmware file to download. Make sure this is the
correct file. Click on Update Gateway. Once the upgrade is complete the ADSL Modem
will reboot. You will need to log back onto the ADSL Modem after the firmware upgrade
is completed. The firmware upgrade should take about 5 minutes to complete. Note: Do
not remove power from the ADSL Modem during the firmware upgrade procedure. Fig
1-25.

Figure 1-25 : Firmware Upgrade

Page 25 of 33