Page 2
1. Product warranty does not apply to damage caused by lightning, power surges or wrong voltage usage. 2. This product is for use only in UL Listed computers.
Page 5
This section gives a brief introduction of DSL905E features and its specifications.
Page 11
This chapter contains information on the hardware setup of DSL905E. Power off your computer or/and any connected devices before connecting your router ! Please note the Ethernet cable types that are to be used for connections.
Page 15
You need to configure the Ethernet Card on your PC in order to run DSL Router Commander from your PC. The screen shots and screens information illustrated in this manual serve only as a guide. The exact information you see on your system may vary, depending on your system configurations.
Page 17
DSLTEST will check both the Ethernet Card configuration and the ADSL line connection. If the first test failed, the next test will be skipped. Proceed to fix the problem first before running DSLTEST again. The Line Test is optional. Please check with your ISP if they support this feature.
Page 18
The test is not carried out as the previous test has failed. To enable DSLTEST log file, you must first copy the entire Tools directory from the DSL905E Series CD-ROM to your harddisk. From Tools\DSLTEST directory, double-click DSLTEST.exe. Click the DSLTEST icon (at the top-left corner) of the DSL Test dialog box. Select Settings.
Page 19
This section provides answers to the commonly asked questions on your router.
Page 23
This section provides a step-by-step solutions to problems that you may encounter when setting up or using your router.
Page 24
Figure B-1. Distance between DSL905E and Power adapter...
Page 28
config confirm config config delete config flush home config save dhcpserver reset...
Need help?
Do you have a question about the DSL905E Series and is the answer not in the manual?
Questions and answers