Page 2
The hardware described in this manual is owned by Aztech Systems Ltd and is protected by international copyright laws. You may not remove the copyright notice from any part of the hardware or any copy of the written materials accompanying the hardware.
Page 3
This product is for use only in UL Listed computers.
Page 7
This section gives a brief introduction of DSL905E features and its specifications.
Page 13
This chapter contains information on the hardware setup of DSL905E. Power off your computer or/and any connected devices before connecting your router ! Please note the Ethernet cable types that are to be used for connections.
Page 16
You need to configure the Ethernet Card on your PC in order to run DSL Router Commander from your PC. The screen shots and screens information illustrated in this manual serve only as a guide. The exact information you see on your system may vary, depending on your system configurations.
Page 18
DSLTEST will check both the Ethernet Card connection and configuration, as well as the ADSL line connection. If the first test failed, the next test will be skipped. Proceed to fix the problem first before running DSLTEST again.
Page 19
Result Description PASS The test is successful. You will be prompted on the error. Click OK, fix the error and FAIL click Test again. SKIP The test is not carried out as the previous test has failed.
Page 20
This section provides answers to the commonly asked questions on your router.
Page 24
This section provides a step-by-step solutions to problems that you may encounter when setting up or using your router.
Page 25
Figure B-1. Distance between DSL905E and Power adapter...
Page 27
config confirm config config delete config flush home config save dhcpserver reset...
Page 29
This section contains the specifications for DSL905E.
Page 31
(supports any platform with an ethernet card installed) •...
Page 32
The product specifications herein are subject to change without prior notification.
Need help?
Do you have a question about the DSL905E Series and is the answer not in the manual?
Questions and answers