Related Manuals for Aztech DSL901E
Summary of Contents for Aztech DSL901E
- Page 3 The hardware described in this manual is owned by Aztech Systems Ltd and is protected by international copyright laws. You may not remove the copyright notice from any part of the hardware or any copy of the written materials accompanying the hardware.
- Page 5 Connecting DSL901E ..................15 Setting Up the Ethernet Card ................17 4.1 Configuring the Ethernet Card ..............17 4.2 Verifying the Link Between the Ethernet Card and DSL901E ....19 Installing WinPoET Dialer .................. 21 Connecting to the Internet ................25 6.1 Establishing the Connection for broadband service ......
- Page 6 Frequently Asked Questions ................29 Troubleshooting Guide ..................31 Technical Specifications ..................37 C.1 Main Features .................... 37 C.2 Platform Support ..................38 C.3 External Connectors ................. 38 C.4 LED Indicators ................... 38 C.5 Environmental ................... 39 C.6 System Requirements ................39...
- Page 7 This section gives a brief introduction of DSL901E features and its specifications.
- Page 8 1 These manuals can be found on your DSL 900/9000 Router Series CD-ROM that comes with your router package.
- Page 9 Ethernet DSL901E PC with Ethernet Card DSL901E multiple PCs with Ethernet Cards...
- Page 11 This chapter contains information that you need to know before setting up DSL901E. It is important that you go through them. DSL901E CD DSL901E User's Manual Power adapter UTP Crossover Ethernet cable (RJ-45) Power cable Telephone cable (RJ-11)
- Page 12 ADSL Link LED Power LED Ethernet Link ADSL Transmit LED Ethernet ACT ADSL Receive LED When the Power Switch is on, the Power LED will light up. Once the modem is initialized, the ADSL Link LED will start blinking, trying to establish a connection.
- Page 15 This chapter contains information on the hardware setup of DSL901E Power off your computer and any connected devices before connecting DSL901E ! DSL901E Power Adaptor The Power Mains to Ethernet Card, Hub or Switch POTS Splitter Telephone Wall Socket (ADSL line) Telephone Set 2 For connection to a PC Ethernet card, please use a cross Ethernet UTP cable.
- Page 17 You are required to replace these values with those given by your ADSL Service Provider/System Administrator. 5 DSL Router Commander is a user friendly tool that allows you to setup your DSL901E network configurations with ease.
- Page 18 (If you do not see a TCP/IP networking protocol, re-install your Ethernet card.) 6 This guide uses 3Com EtherLink III ISA Ethernet Card as an example. Select the Ethernet Card listed in your system.
- Page 21 The screen shots and screens information illustrated in this manual serve only as a guide. The exact information you see on your system may vary, depending on your system configurations. For any dissimilarities, follow closely to the instructions as prompted on your PC screen.
- Page 25 This chapter guides you on how to establish your connection for broadband service. If you are not able to establish your Internet connection, please refer to Appendix B - Troubleshooting Guide on ‘I am not able to connect to the Internet.’...
- Page 27 For Windows ® 98/98 Second Edition/95 users, Windows will need your Windows CD-ROM to complete the uninstallation of WinPoET software. Please have the CD-ROM by your side before proceeding.
- Page 29 This section provides answers to the commonly asked questions on your ADSL modem.
- Page 31 This section provides a step-by-step solutions to problems that you may encounter when setting up or using your ADSL modem.
- Page 32 Mains Supply Power adapter be greater Rear view of than 10cm DSL901 Telephone cable (RJ-11) - ADSL Line Telephone wall socket config...
- Page 33 config delete config flush home , config save restart...
- Page 35 Please ensure that you have proceeded with Chapter 4 - Configuring Your Ethernet Card before running the DSLTEST. If one of the tests failed, subsequent tests will be skipped. Please proceed to fix the problem first before running the test program again.
- Page 37 This section contains the specifications for DSL901E.
- Page 40 P/N: 040-512443-101 (May 2001)
Need help?
Do you have a question about the DSL901E and is the answer not in the manual?
Questions and answers