Settings And Status; Io Setup (Input/Output Port) - Furuno FA-40 Operator's Manual

3.

SETTINGS AND STATUS

3.1

IO setup (input/output port)

You can change the input/output settings from the [IO Setup] menu.
Menu item
[Common]
[Port Priority (Heading)]
[1st], [2nd], [3rd]
[NMEA2000]
[CAN Unique Number]
[CAN Address]
[Output Mode]
[Format]
[NMEA0183]
[NMEA1 Output Mode],
[NMEA2 Output Mode]
[NMEA1 Speed],
[NMEA2 Speed]
[CAN Unique Number], [CAN Address]: Display only.
[IO Setup] menu for PC
Set the input port priority for heading data.
Shows the CAN unique number.
Shows the CAN address.
Select the output mode among [OFF], [AIS], [GNSS], or [AIS + GNSS].
[OFF]: Does not output AIS or GNSS data.
[AIS]: Outputs AIS data.
[GNSS]: Outputs GNSS data.
[AIS + GNSS]: Outputs both AIS and GNSS data.
Select the output PGN format version from [NMEA2000 V2] or
[NMEA2000 V1].
Select the output mode among [OFF], [AIS], [GNSS], or [AIS + GNSS].
When selecting [OFF] or [GNSS] in the [NMEA1/NMEA2 Output Mode]
menu, select the baudrate for NMEA1/NMEA2 from [AIS: 38400 bps] or
[Sensor: 4800 bps].
Description
3-1