Sony FDDR-7000 Installation Manual page 39

3-1-4. VIO-30 Board
D18
D14
D12
D10
D8
D6
S3
S4
1
1
RV2 RV2
1 1
RV4 RV4
1 1
RV5 RV5
RV6 1 1 RV6
RV10 1 1 RV10
RV12 1 1 RV12
. LED
D6 (G1) : OUT1 (yellow) Video output channel-1 output
module indication.
Turns on when the SD-46 board is correctly
installed and operating normally.
D8 (G1) : OUT2 (yellow) Video output channel-2 output
module indication.
Turns on when the SD-46 board is correctly
installed and operating normally.
D10 (F1) : OUT3 (yellow) Video output channel-3 output
module indication.
Turns on when the SD-46 board is correctly
installed and operating normally.
D12 (F1) : OUT4 (yellow) Video output channel-4 output
module indication.
Turns on when the SD-46 board is correctly
installed and operating normally.
D14 (F1) : OUT5 (yellow) Video output channel-5 output
module indication.
Turns on when the SD-46 board is correctly
installed and operating normally.
D16 (F1) : OUT6 (yellow) Video output channel-6 output
module indication.
Turns on when the SD-46 board is correctly
installed and operating normally.
FDDR-7000 IM
(Side-A/Component side)
3-1. Description of On-Board Switch Settings and LEDs
. Switch
S3 (J1), S4 (L1) :
Used during production in factory. These switches are
all set to OFF during normal operation and have been set
to OFF when shipped from the factory.
Some machines do not have these switches.
S3, S4
ON
1 2 3 4 5
• Adjustment controls
RV1 to RV8 (M12), RV9 to RV12 (N1)
Not used. (These controls do not function.)
Some machines do not have these adjustment controls.
6 7 8
3-7(E)