Sony FDDR-7000 Installation Manual page 12

1-4. Rack Mounting
3. Secure the bracket to the outer member 1 by the eight
screws (B4 x 8) supplied with the RMM-FD7000. To
see the screw hole of the outer member 1, move the
outer member 2 back-and-forth.
Plate nut (long)
Brackets
Plate nut (long)
B4 x 8
Outer member 2
4. Temporarily secure the bracket to the outer member
assembly 1 to both sides of the rack by the eight
screws (C4 x 12) and the eight washers (W4) supplied
with RMM-FD7000. Adjust the installation position
of the outer member to meet the specification shown in
the figure. After the adjustment, tighten the screws
(B4 x 8) temporarily secured in the step 3.
Rack
C4 x 12
W4
1-6(E)
Outer member 1
B4 x 8
B4 x 8
Outer member stopper
B4 x 8
(Used to fixing the
outer member 2.)
Plate nut (short)
Outer member
Bracket
12.7
44.45
Rack
C4 x 12
W4
Spec
+5
50
_0
5. Install the unit in the rack while releasing the stopper
of the inner member.
6. After confirming that the unit can be moved smoothly,
tighten the screws (C4 x 12) temporarily secured in
the step 4.
Rack
Outer member 2
FDDR-7000
Inner member
. When housing the set, shift the slide bearing as illustrated.
Outer member 2
Inner member
Plate nut (short)
Bracket
Outer member 2
Stopper
Slide bearing
FDDR-7000 IM