Table of Contents
Advertisement
5-3. Installation of Operation Software
4. Turn on the main power switch of the host computer (personal computer).
5. Insert the CD-R containing the Operation Software BZFD-7020 into the CD-ROM drive of the
personal computer.
6. Execute setup.exe from the root directory of the CD-R. (The following window appears.)
7. Click Install from the window to install the Operation Software BZFD-7020.
Press Quit to stop installation.
8. To start installation, select (by clicking) a FDDR-7000 to which you want to install the operating
software, from window. Click Install.
Press Quit to stop installation.
If the switches (DIP) on the CPU-253 board have not been set yet, [Running] appears on the version
portion of the column.
n
If you attempt to install the Operation Software in the FDDR-7000 while Running is displayed, the
message [Unable to install Operation Software. Check DIP switch setting and try again] appears.
Select the FDDR-7000 to
which you want to install
the operating software.
5-4(E)
FDDR-7000 IM
Advertisement
Table of Contents
