About This Guide
The Acme Packet 6300/6350 is a high performance, high capacity session border
controller that optimally delivers interactive communications — voice, video, and
multimedia sessions — across wireline, wireless, and cable IP network borders. With
its 3U design the Acme Packet 6300/6350 provides exceptional functionality in a tightly
integrated system. This chapter provides an introduction and overview of the Acme
Packet 6300/6350 main components.
Revision History
This section contains a revision history for this document.
Date
September 28, 2012
September 29, 2012
October 3, 2012
October 4, 2012
October 5, 2012
November 14, 2012
December 18, 2012
January 9, 2013
Mat 7, 2013
May 9, 2013
Aug 16, 2013
November 11, 2013
February 24, 2014
October 16, 2014
Revision Number
Description
Revision 1.0
First Draft Acme Packet 6300 Hardware
Installation Guide
Revision 1.1
Added updates to document
Revision 1.2
Added updates to the Alarms section
Revision 1.3
Added updates to the Boot Parameter section
Revision 1.4
Added updates to the Alarms section
Revision 1.5
Added updates to the power source sections
Acme Packet 6300 Hardware Installation and
Maintenance Guide
Added VCCI-B Certification
Revision 1.6
Added the halt command
Added the terminology Storage Device
Changed a picture in the mounting section
Revision 1.7
Added the locking mechanism to the guide rail
section.
Revision 1.8
Added reference connect NIU removal
Revision 1.9
Updated Optical Trans section
Revision 1.10
Updated Specification section
Revision 1.11
Removed all instances of Net-Net
Revision 1.12
Added these new sections:
- TCM Removal and Replacement
- Replacing the SSM3 Module
- Installing SODIMMs
- Replacing Transcoder DSP Modules
- Replacing the SSD
Formatted photos and tables to conform to new
standard
Revision 1.13
Changed references to Media Ports from GigE
to 10GbE to clarify Media Port speed.
Updated Heat and Power Dissipation
information in the Specifications chapter.
ix
Need help?
Do you have a question about the Acme Packet 6300 and is the answer not in the manual?