Konica Minolta AeroDR SKR 4000 Operation Manual page 13

WARNING
• If there is any smoke, odor, or abnormal sound, it may
cause a fire if use is continued, so immediately turn the
power switch off, unplug the power plug from the wall out-
let, and contact Konica Minolta technical representatives.
• Take note of the following to reduce the risk of fire, electric
shock, or electrical leakage:
— Use specified cables for the power cable, etc and AC
adapter
— Use a wall outlet with the correct rating as a power
source
— Confirm that the power plug is properly connected to the
wall outlet without any slack.
— Use a grounded power source.
— If you do not plan to use this device for an extended pe-
riod of time, unplug the power plug.
— The supplied power cable and AC adapter are dedi-
cated for this device, so do not use it elsewhere.
— Avoid exposure to liquid such as water.
— Make sure that foreign material, such as pieces of metal
or wire, does not get inside.
— Do not allow any metal or conductive objects to come
into contact with the connector of the DC Power Cable.
— Do not handle the power plug with wet hands.
— Do not let soil or dust accumulate on the power plug,
DC Power Cable.
— Do not use extension cords.
— Do not connect many plugs to a single electrical outlet.
— Do not damage the power cable, AC adapter or DC
Power Cable. Also, do not use damaged cables.
— Do not apply a load on the power cable.
— Do not touch the output terminal of the DC Power Cable.
• If there is any abnormality in appearance such as deforma-
tion of the housing or a crack, stop using the device immedi-
ately and contact Konica Minolta technical representatives.
• Do not connect the wired connection connector of Battery
with metal.
• Do not carry or store Battery with metal objects such as
necklace, hair pins, coins, or keys.
• Do not leave Battery in a high temperature environment,
such as a place under the direct sunlight or inside a car
parked under the blazing sun. It may cause Battery to leak.
• In respect to Battery, pay attention to the followings to pre-
vent heating, explosion, and fire:
— Do not expose Battery to strong impact (dropping the
battery from an elevated location) or throw Battery.
— Do not nail Battery, hit Battery with a hammer, or step
on Battery.
• Please pay attention on the followings when using the
Battery:
— Do not step on or place an object on the Battery.
— Use the specified Battery.
— Do not disassembly or alter the Battery.
— Do not submerge the Battery.
— The Battery in the storage should be kept dry and
should not get wet.
— Use the Battery Charger and DC Power Cable
shipped with this device for charging Battery.
• Do not turn off the power while this device is in opera-
tion
• Always turn off the power when connecting and discon-
necting the AC Power Cable and Ethernet cable.
• When disconnecting the AC Power Cable, hold the con-
nector housing, plug, or connector.
• During examination, pay attention and do not allow the
patient to touch the DR Detector wired connection con-
nector, the power switch, or the selection switches.
• Please pay attention on the followings when using this
device: Comply with the load range for the DR Detector.
The load range is: 150 kg for the entire surface of the
DR Detector, 100 kg for a portion.
• Images exposed by the DR Detector alone using the Image
Storage are not linked to any patient information. When us-
ing the Image Storage for exposure, associate the exposed
patient to the number of exposures to record the expo-
sures. Also, use lead markers or similar objects to capture
information that helps identify the exposed patients.
• Take note of the following when using this device:
— Do not use devices that emit electromagnetic waves
such as high-frequency therapy equipment, mobile
phones, or pocket pagers, close to this device.
— Use under the specified environmental conditions.
Failure to do so may result in degradation of perfor-
mance or malfunction
• Take the following notes when using the DR Detector:
— Use the DR Detector on a flat base. If the DR Detec-
tor is placed on a sloping surface and subjected to a
load, its internal sensor may be damaged.
13
Safety precautions
CAUTION
1
2
3
4
5
6
7
8
9
10
11
12