Adjusting The Stiffness Of The Running Bed - Precor M9.3s Owner's Manual

Photo 7
page 20

Adjusting the Stiffness of the Running Bed

The M9.3s Low-Impact Treadmill is specially designed to allow you to adjust
the amount of impact reduction. Three levels are available: Level 1, Hard;
Level 2, Medium; and Level 3, Soft.
The level you choose depends on your weight and running style. To choose the
best impact reduction level for you, use the treadmill with the running bed set at
each of the settings. Then, select the level that suits your exercise style the
best.
Important: Do not adjust the bed impact reduction level when someone is
standing, walking or running on the treadmill. Be sure to turn OFF the treadmill,
before making any adjustments.
To adjust the running bed impact reduction level, follow these steps:
1. Facing the side of the treadmill, firmly grasp the control lever shown in
Photo 7 and pull the lever outward until the upper end is clear of the hole.
2. Rotate the lever right or left, and insert the end of the lever into the hole at
the desired setting.
Control lever for
adjusting impact
reduction.