Connecting The Xgs2-Sd Processor Module - Keysight Ixia XGS2 Getting Started Manual

Connecting the XGS2-SD Processor module

This section describes the process of connecting the XGS2-SD Processor module. To connect the
module you need to do the following:
1. Insert and remove the Processor Module.
2. Connect the RJ45 management port (4) as the designated management port to your lab
management switch.
3. Connect the VGA (2) and USB (3) ports to the KVM infrastructure (or to a local monitor, mouse,
and keyboard).
– 16 –