Ip Addressing Issues - Keysight Ixia XGS2 Getting Started Manual

Processor module -
Ethernet LEDs for
each port

IP Addressing Issues

The XGS2-SD chassis model requires the following management IP addresses:
the IxOS address
l
If your network implements a DHCP service, the XGS2 IP addresses will automatically be assigned by that service,
unless you choose to assign static IP addresses instead. When assigning static IP addresses, you must observe the
following requirements:
The two management IP addresses must be in the same subnet.
l
The two IP addresses needed for management cannot be on the following subnets:
l
10.1.1.x/24 - internal virtual network
n
10.1.2.x/24 - internal virtual network
n
10.0.x.x/16 - default internal port address. This can be changed from IxExplorer Chassis Properties.
n
Failure to observe these requirements will result in connectivity failures.
LED Color
Link LED Green
Act LED
Description
Port has link.
Note: Link and Activity
LEDs are included for all
Ethernet ports.
Flashes when port has activity.