Led Indicators - Keysight Ixia XGS2 Getting Started Manual

LED Indicators

The XGS2 chassis provides LED indicators that provide a visual presentation of the operational status of the device
and its individual ports.
LED/LCD Display
The XGS2-SD chassis has front panel LEDs for each load module slot. The following table describes the purpose and
meaning of each indicator:
Label Color
Power Green
In Use Amber
CPU Slot LED Definitions
The specifications of LEDs for the Processor module and the LEDs above the Processor module slot are shown in the
following table:
On the chassis front
face
Processor module -
front panel
Description
When the Power LED is flashing, the board
is being detected or initialized.
The Power LED is illuminated when the
board is powered.
The Active LED is illuminated when you
have taken ownership of the load module.
If you run traffic from IxExplorer, without
taking port ownership, the In Use light is
not illuminated.
LED Color
CPU card Yellow
Slot LED
Green
Stdby Pwr Green
LED
CPU Pwr Green
LED
HDD Act
LED
Bkpln Link Green
LED
Description
The backplane is initializing
The backplane has initialized
5V Stand-by power is available
CPU Card power is available
PCIe link to backplane is up