Table of Contents
Advertisement
4 Basic operation
Dear Customer,
The following section starts by covering basic operation as well as recurrent operating steps
for the TV. This should make it easier to read the instruction manual, since it avoids repeated
description of identical steps at each individual stage.
If it is necessary for a function or setting for the TV to be different from the basic operation,
the difference in operation is described in detail in the relevant section in the instruction
manual.
The so-called "On Screen Display" is used on your TV. This simplifies operation of the
television since the buttons on the remote control can take on different functions. This makes
it possible to reduce the number of buttons.
In this On Screen Display (OSD for short) the selected functions or settings are highlighted.
Furthermore, you will find a line along the lower edge of the screen where the various buttons
on the remote control are shown with their current functions.
In this instruction manual the terms shown in the OSD as well as the buttons to be
pressed are distinguished from the rest of the text by the print format used.
Warning - indicates an important note which you must always observe in order to avoid
problems with the television, loss of data or unwanted operation.
Tip - indicates a note about the function described as well as other functions associated
with it and any others to be observed with reference to the respective item in the
instruction manual.
4.1 Switching the television on/off
>
When the receiver is on standby, you can switch it on by pressing the
On/Standby button on the remote control/TV.
>
When operating normally you can switch the device to standby mode by pressing the
On/Standby button on the remote control/TV.
When switching the television on and off, note section 7.1 of the instruction manual as
well, plus the references given in this section.
7
EN
FR
IT
Advertisement
Table of Contents
