TechniSat TechniMedia UHD Quick Start Manual page 17

Number of antenna signals (DVB-S)
Select the number of attached DVB-S antenna feed lines.
If the DVB-S source has been disabled, this page of the installation wizard does not
appear; you are taken directly to the "Antenna settings (DVB-T)" page instead.
Use the right/left arrow keys to select the attached antenna signals and confirm by
>
pressing the OK button.
Antenna configuration (DVB-S)
In this step of the installation you can adjust your TV setup to the configuration of your
satellite antenna.
Press the OK button to accept the default antenna setting and continue with the
>
"Antenna configuration (DVB-T)" section.
> If the configuration of your reception equipment does not match the default setting,
you can open the antenna configuration by pressing the Option button and adjust the
setting on your reception equipment according to item 10.6 in the instruction manual.
17
EN
FR
IT