TechniSat TechniMedia UHD Quick Start Manual page 29

6.13 Format switchover / Zoom
Pressing the Zoom/Format button allows you to select the various pre-defined
>
formats (original, optimum, optimum 16:9, full zoom and stretch) as well as
the user-defined setting, where you can adjust the picture as you wish.
The following options are available to adjust the picture according to your personal
preference:
red function key
green function key
yellow function key
blue function key
up/down arrow key
down arrow key
OK button
left arrow key
To hide the format switching display press the Back button
>
6.14 PiP / PaP function
Your television is equipped with both the PiP function (PiP = Picture in Picture), and the
PaP function (PaP = Picture and Picture).
When doing so please also note section 7.16 in the instruction manual.
6.14.1 Calling up the PiP / PaP function
You can switch on the PiP or the PaP function by pressing the PiP / PaP button.
>
6.14.2 Toggling PiP / PaP pictures
You can toggle between the two pictures by pressing the Back button.
>
The PiP/PaP picture becomes the main picture and vice versa.
6.14.3 Exiting the PiP / PaP function
You can exit the PiP/PaP function by pressing the PiP / PaP button or by pressing the
>
TV/Radio button.
6.15 Freeze frame
The television picture is displayed as a freeze frame by pressing the Freeze frame
>
button.
> Freeze frame is ended by pressing this button again; normal playback appears on the
television screen again.
The sound will continue to be reproduced normally during freeze frame.
6.16 Sleep timer
You can set the switch-off time of your TV using the sleep timer.
You can set the sleep timer by pressing the sleep timer button a number of times (15
>
minutes to 120 minutes) or to switch it off.
increase the picture height
decrease the picture height
increase the picture width
decrease the picture width
move the picture upwards (only where picture height has
been increased)
move the picture downwards (only where picture height has
been increased)
select zoom levels
reset user-defined format setting
29
EN
FR
IT