TechniSat TechniMedia UHD Quick Start Manual page 24

6.2 Selecting a channel
EN
FR 6.2.1 Using the channel up/down buttons
You can switch between channels one at a time using the Channel +/- buttons on the
>
IT
remote control or on the TV.
6.2.2 Using the numeric pad keys
Use the numeric keypad keys to enter the number of the channel you
>
want.
For example:
1
1, then 4
2, then 3,
1, then 2,
When entering channel numbers with multiple digits, you have approx. three seconds
after pressing a key to complete the entry.
If you wish to enter a one, two or three-digit number, you can accelerate the switching
process by holding down the last digit for longer, or by pressing the OK button.
6.2.3 Using the TV list
Press the OK button.
>
The TV channel list appears in television mode and the radio channel list appears in
radio mode. The channel currently selected is highlighted.
You can view additional data about the current programme by pressing the INFO
>
button.
6.2.3.1 Selecting the channel
You can now highlight the channel you want using the up/down arrow keys, the
>
page up/down keys and the numeric keypad keys.
Exit the Navigator by the pressing the OK button; the highlighted programme
>
is displayed on the screen.
then 4
then 4, then 5
for channel slot 1
for channel slot 14
for channel slot 234
for channel slot 1245
24