Ending Recording Automatically; Dvr Playback - TechniSat TechniMedia UHD Quick Start Manual

7.1.3 Ending manual recording
EN
> First select the recording to be ended by selecting the channel on which the recording
FR
is running as described under section 6.2 of the quick start manual.
Pressing the Stop button generates a query as to whether the recording should be
>
IT
stored or discarded.
Select Store to save the recording, or Discard not to save the recording, or Back to
>
continue with the recording.

7.1.4 Ending recording automatically

Pressing the record button causes a window to open containing all available
>
functions.
You can, for example, select +1 hour so the TV will continue to record the channel for
>
this period and then automatically stop recording.
7.1.5 Timer recordings
This function turns your television on and off for the selected programme, so as to record it
while you are out, for example. To this end you can programme the timer either manually or
automatically using the SFI (see points 7.18.6 and 7.19 of the operating manual).

7.2 DVR playback

You can gain access to your DVR recording using the DVR Navigator.
7.2.1 Calling up the DVR Navigator
The DVR Navigator can be called up in the following ways. Depending on whether you are in
TV or radio mode, a list appears with all the TV or radio recordings available on the attached
storage medium.
36