TechniSat TechniMedia UHD Quick Start Manual page 16

Display mode
EN
FR
IT
Use the up/down arrow keys to select your preferred display mode and confirm by
>
pressing the OK button.
You can change the selected display mode again to whatever you want after
AutoInstall, as described in section 10.1 of the instruction manual.
When using the intense or natural image modes, observe the information displayed
and points 3.3.3, 7.10 and 10.1 of the operating manual and confirm by pressing the
OK button.
Selecting reception signals
Use the up/down arrow keys to select the reception signals for which you want to
>
switch availability on or off.
DVB-S
DVB-C
DVB-T
Analog CT for analogue terrestrial and cable channels.
Press the OK button to open the selection window, highlight the setting you want with
>
the up/down arrow keys and close the window by pressing the OK button again.
To get to the next step of the installation, use the arrow keys to highlight the
>
Accept field and confirm with the OK button.
for digital satellite channels;
for digital cable channels;
for digital terrestrial channels;
16