TechniSat TechniMedia UHD Quick Start Manual page 21

watchmi
Select the desired option using the arrow keys and then confirm by pressing the OK
>
button.
Off
On
Please also note the further instructions and explanations regarding watchmi under
point 7.26 of the operating manual.
Loading SFI data
In order that the data in the electronic programme guide SFI (SiehFernInfo) can be displayed,
you must first download it. To this end your TV automatically starts loading the SFI data.
> If you do not want to wait for the SFI data to be downloaded, you can skip this process
by pressing the Info button.
If the SFI update has been skipped, your TV automatically loads the SFI data at the
time configured as per point 10.8.2 of the operating manual, provided the function
(point 10.8.1 of the operating manual) remains activated and the device is also in
standby at this point in time. You can also start the update manually at any time (point
10.8.7 of the operating manual).
The watchmi service is switched off.
The watchmi service is switched on.
21
EN
FR
IT