Basic Operation - TechniSat TechniVision 22 HD Quick Start Manual

5 Basic operation

Dear Customer,
the following section starts by covering basic operation as well as recurring operating
steps for the TV. This should make it easier to read the instruction manual, since it avoids
repeated description of identical steps at each individual stage.
The so-called "On Screen Display" is used on your television. This simplifies operation of
the television since the buttons on the remote control can take on different functions, which
makes it possible to reduce the number of buttons.
In this On Screen Display (OSD for short) the selected functions or settings are highlighted.
Furthermore, you will see a line at the lower edge of the screen in which the various buttons
on the remote control are shown with their current functions.
In this instruction manual the terms shown in the OSD as well as the buttons to be
pressed are highlighted from the rest of the text by the display format used.
Warning - indicates an important note which you absolutely should observe in order to
avoid problems with the television, loss of data or unwanted operation.
Tip - indicates a note about the function described as well as other functions
associated with it and any others to be observed with reference to the respective place
in the instruction manual.
5.1 Switching the television on/off
When the TV is on standby, you can switch it on by pressing the On/Standby button.
>
> When operating normally you can switch the TV to standby mode by pressing the
On/Standby button.
When switching the TV on/off, also observe point 7.1 and points 7.1.1 - 7.1.4 as well
as the instructions given under these points.
9
Basic operation