Table of Contents
Advertisement
Quick Links
Operations & Maintenance Manual
For Commercial Use Only
Form No. L9772 BA 06/20 ©Tornado Industries, LLC. All rights reserved
BD 26/27 RIDE ON SCRUBBER
MODEL NO: 99772
Save These Instructions
TORNADO INDUSTRIES, LLC
FORT WORTH, TX 76140
PHONE 800-VACUUMS
WWW.TORNADOVAC.COM
3101 WICHITA COURT
FAX 817-551-0719
Advertisement
Table of Contents
Related Manuals for Tornado BD 26/27
Summary of Contents for Tornado BD 26/27
- Page 1 For Commercial Use Only BD 26/27 RIDE ON SCRUBBER MODEL NO: 99772 Form No. L9772 BA 06/20 ©Tornado Industries, LLC. All rights reserved Save These Instructions...
- Page 2 NOTES For warranty information go to www.tornadovac.com Within 30 days, to activate the warranty, go to; https://tornadovac.com/services/warranty-registration-form.aspx...
-
Page 3: Table Of Contents
Table of Contents Automatic squeegee lift going backwards INTRODUCTORY COMMENT Working in automatic mode TECHNICAL DESCRIPTION Working in manual mode LEGEND PANEL OF CONTROLS Flow adjustment of detergent solution LEGEND MACHINE Brush pressure adjustment GENERAL RULES Electric protection SYMBOLS Overflow device BEFORE USE STOPPING MACHINE AFTER CLEANING DAILY MAINTENANCE... -
Page 4: Introductory Comment
Please safeguard the original receipt / invoice. If you experience any problems with your unit during the warranty period, the original receipt / invoice will act as proof of purchase. Contact Tornado for any warranty inquiries. -
Page 5: Legend Panel Of Controls
LEGEND PANEL OF CONTROLS 15. SIGNAL LAMP PARKING BRAKE ON 1. DISPLAY 16. SIGNAL LAMP UP/DOWN BRUSHES 2. SIGNAL LAMP MANUAL MODE ON 17. PUSH BUTTON UP/DOWN BRUSHES 3. PUSH BUTTON CONNECTION MANUAL 18. SIGNAL LAMP STARTING BRUSHES MODE ROTATION 4. -
Page 6: Legend Machine
LEGEND MACHINE RECOVERY TANK 11 EXHAUST HOSE RECOVERY TANK SOLUTION TANK 12 SQUEEGEE ASSEMBLY SEAT 13 CONTROL PANEL DRIVE WHEEL 14 ELECTRICAL LAYOUT COVER CAP FOR DETERGENT SOLUTION 15 ACCELERATOR PEDAL SUCTION HOSE 16 SOLUTION DRAIN PLUG SUCTION COVER 17 DETERGENT SOLUTION OUTER FILTER BLOCKING LEVERS SUCTION COVER 18 TRACTION MOTOR WHEEL SQUEEGEE HOSE... -
Page 7: General Rules
Tornado - Every 200 working hours - Do not use the machine recommended accessories. have a machine check on surfaces covered with... -
Page 8: Symbols
Symbol denoting the Symbol denoting the Symbol denoting the solution valve. signal lamp of the crossed bin. Indicates Indicates the solution starting of the brushes that at the end of its valve lever. Indicates rotation. activity, the machine the signal lamp of has to be disposed the solenoid valve Symbol denoting... -
Page 9: Before Use
BEFORE USE ATTENTION: HANDLING OF THE PACKED MACHINE When the parking brake is The machine is supplied with released manually, for example suitable packing for fork lift when the machine has to be truck handling. moved without batteries, avoid The total weight is 591 lbs./268 covering slopes and do not park on them either. -
Page 10: Battery Installation
BATTERY INSTALLATION For batteries installation it In order not to cause The machine is equipped is necessary to reach the permanent damage to the either with batteries in serial battery compartment as battery, it is necessary to avoid connection or elements of indicated under paragraph their complete discharge, DIN-type assembled together... -
Page 11: Switching On The Machine
SETTING OF THE BATTERY 3. The version of the software CHECK CARD program of the card (for ex- The setting of the battery ample 4-6). check card can be: GE 24 (check card set for AGM batteries) or Pb 24 (check card set for lead batteries). -
Page 12: Hour Meter
HOUR METER In order to have a perfect necessary to fix this optimum The machine is equipped with drying result through the condition making touch an hour meter located on the squeegee, the rear rubber slightly the wheels onto the same display (1) of the battery must have the lower bending floor. -
Page 13: Brush Assembly And Disassembly
The use of other brushes can Block the coupling lever (2) in ATTENTION: compromise the result. the rear part of the brushes FLOOR CLEANING base group to the ring placed To carry out brushes assembly at the extremity of the metal operations with the electric RECOVERY TANK strip still free. -
Page 14: Starting Of The Machine
5. Pressing the push button FORWARD AND BACKWARD (8) the automatic (AUTO) MOVEMENT functioning is chosen, while It is recommended to always pressing the push button (5), carry out the mere transfer of the functioning of the machine the machine in mode (BREAK becomes manual (MAN). -
Page 15: Horn
When the batteries are When the backwards connected and when the key movement is selected switch (A) is positioned on 1, the squeegee is brought with the brake inserted, the automatically to the upper lamp (2) comes on. position. It will then lower again in the following forward movement. -
Page 16: Working In Manual Mode
6. Pressing the accelerator Once it is lowered, the brushes pedal, the machine begins to ATTENTION: begin to turn. The blinking move and in automatic mode signal lamp (7) indicates that The washing and drying all the working functions the brushes base is lowering functions, when they are not are activated. -
Page 17: Flow Adjustment Of Detergent Solution
ELECTRIC PROTECTION up to close the flow. ATTENTION: The machine is equipped It is better to adjust the water with an electronic system of flow during work and at every In manual mode every protection for all components adjustment of the brushes function of the machine has that carry out functions pressure. -
Page 18: Daily Maintenance
The mode (BREAK WASHING) 1. A the end of the washing RECOVERY TANK EMPTYING is specific for the transfer cycle, pressing the push AND CLEANING at the end of the cleaning button (1), the functioning of 1. Remove the exhaust hose operation. -
Page 19: Brush Cleaning
2. Disassemble the squeegee (2) from its support (1) by loosening the knobs (4) counterclockwise. 3. Clean the internal part of the squeegee inlet. 4. Clean the squeegee rubbers. 5. Reassemble all parts paying attention to put the washers SQUEEGEE HOSE CLEANING BRUSHES CLEANING (3) into position, they are two Weekly or in case of... -
Page 20: Two-Month Maintenance
If they are worn, they have THE VACUUM MOTOR DOES to be replaced. Just release NOT WORK the springs placed in the 1. Verify that the key switch rear part of the brushes base (1) is positioned clockwise group from the slots placed to switch on the machine. -
Page 21: The Traction Motor Does Not Work
4. Check that the solution To replace the brushes, see 4. If, both in mode (MAN) and valve is open (see under instructions under paragraph (AUTO), the signal lamp (3) is paragraph “FLOW “BRUSHES DISASSEMBLY” on but the brushes do not turn, ADJUSTMENT OF THE and “BRUSHES ASSEMBLY”. -
Page 22: Excessive Foam Production
EXCESSIVE FOAM PRODUCTION Check that low foam detergent has been used. Add small quantities of anti foam liquid into the recovery tank. Please be aware that a bigger quantity of foam is produced when the floor is not very dirty. In this case please dilute detergent solution. PROGRAMMED MAINTENANCE INTERVENTION DAILY 20 HOURS * 200 HOURS * 1000 HOURS *... -
Page 23: Recommended Brushes
It is equipped with anchor points which permit the blocking of the abra- sive pad during work. The pad is recommended to clean smooth floors. MACHINE CODE QTY DESCRIPTION BD 26/27 48903020 Brush PPL 0,6 Ø 345 Normal floors. 48903030 Brush PPL 0,9 Ø...
Need help?
Do you have a question about the BD 26/27 and is the answer not in the manual?
Questions and answers
need the part # to order a drain hose for a tornado riding scrubber Model 99772
The part number for a drain hose flange for the Tornado riding scrubber Model 99772 (BD 26/27) is 183-1469.
This answer is automatically generated