Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Tornado 99790
Summary of Contents for Tornado 99790
- Page 1 TORNADO INDUSTRIES, LLC 3101 WICHITA COURT FORT WORTH, TX 76140 PHONE: 800-VACUUMS FAX: 817-551-0719 WWW.TORNADOVAC.COM Operations & Maintenance Manual For Commercial Use Only BD 40/66 RIDE-ON SCRUBBER MODEL NO: 99790 Form No. L9790AB 02/17 ©Tornado Industries, LLC. All rights reserved...
- Page 2 2. All non-wear item parts purchased after warranty expiration are warranted for 90 days. 3. Warranty starts from the date of sale to the consumer or, at Tornado’s discretion, 6 months after the dealer purchased the unit from Tornado, whichever comes first.
- Page 3 NOTES...
-
Page 4: Table Of Contents
SUMMARY Working in manual mode LEGEND PANEL OF CONTROLS Side brush LEGEND MACHINE Working adjustments TECHNICAL DESCRIPTION Flow adjustment of the detergent SYMBOLOGY solution OPTIONAL ACCESSORIES Adjustment of the brushes pressure INTRODUCTORY COMMENT Electric protection GENERAL RULES OF SAFETY Overflow device BEFORE USE STOP OF THE MACHINE Handling of the packed machine... -
Page 5: Legend Panel Of Controls
LEGEND PANEL OF CONTROLS 13. SWITCH SIDE BRUSH CONTROL (optional) 1. DISPLAY VISUALIZATION 14. SELECTOR UP/DOWN BRUSHES 2. PUSH BUTTON VISUALIZATION HOUR METER (DIS- 15. SELECTOR UP/DOWN SQUEEGEE PLAY) 16. SWITCH SUCTION MOTORS 3. PUSH BUTTON VISUALIZATION BRUSHES PRES- 17. SIGNAL LAMP PARKING BRAKE ON SURE SET (DISPLAY) 18. -
Page 6: Technical Description
TECHNICAL DESCRIPTION BD 40/66 Cleaning width mm/in 1000/40 Squeegee width mm/in 1175/46 Working capacity, up to sqm/h/sqft/h 7000/75,347 Brush Diameter mm/in 2 x 510/20 Diameter side brush mm/in 345/14 Brush rpm Side brush rpm Pressure on the brushes kg/lbs 160/353 max Pressure on the side brush kg/lbs 26.5/58... -
Page 7: Symbology
SYMBOLOGY MACHINE Symbol denoting the switch Symbol denoting the push for the water opening and button to visualize the hour Symbol denoting the activa- meter on the display. the signal lamp that the tion and the signal lamp of water is open. the side brush. -
Page 8: Introductory Comment
INTRODUCTORY COMMENT STORAGE AND DISPOSAL − Do not take off the protections Your new Tornado unit is a high qual- − Storage temperature: between 32°F which require the use of tools for their ity, precision-made product. All parts and 131°F (0°C and +55°C). -
Page 9: Battery Installation And Setting Of The Battery Type
4. Complete the assembly connecting the NOTE: Never leave the batteries com- connectors (3) to supply the blinking light pletely discharged even if the machine is and the working lights (optional). not used. In case of traditional batteries, please check the electrolyte level every 20 charging cycles and eventually top them up with distilled water. -
Page 10: Hour Meter
SPLASH GUARD ASSEMBLY 3. The batteries charge level indicator is ADJUSTMENT OF THE SQUEEGEE The two slash guards are already preas- digital and remains fixed on the display. In order to have a perfect drying result sembled on the two metal covers. To The battery charge level starts from 100, through the squeegee, the rear rubber assemble the covers, it is necessary to... -
Page 11: Floor Cleaning
Use only brushes supplied with the ma- chine or the ones indicated in the para- graph “RECOMMENDED BRUSHES”. The use of other brushes can compromise the good washing result. FLOOR CLEANING FORWARD AND BACKWARD MOVE- RECOVERY TANK MENT Verify that the squeegee hose couplings It is recommendable to always carry out (1/2) are correctly inserted into their seats the mere transfer of the machine in mode... -
Page 12: Horn
EMERGENCY-PARKING BRAKE Selecting the backward movement with the In case of an emergency pull the lever selector (8) the squeegee lifts automatical- of the emergency and parking brake (1) ly and will then return to lower itself during placed on the left side of the seat. the next forward movement. -
Page 13: Side Brush
1. Activate the selector (14) of up/down The function is activated by pressing the of the brushes base to lower the brushes. switch (13) independently from the opera- Once it is lowered, the brushes begin to tional use ((manual, automatic and break turn. -
Page 14: Working Adjustments
VERIFICATION AND REPLACEMENT VERIFICATION AND REPLACEMENT OF OF THE REAR SQUEEGEE RUBBER OF THE FRONT SQUEEGEE RUBBER OF THE SIDE BRUSH: THE SIDE BRUSH: Check the squeegee rubber wear and Check the wear of the front squeegee rub- ADJUSTMENT OF THE BRUSHES PRESSURE eventually turn or replace it. -
Page 15: Overflow Device
The mode (BREAK WASHING) is spe- cific for the transfer at the end of the cleaning operation. Restarting the cleaning operation: A. by positioning to the left the selector (12) into position (AUTO) one can start again to work in an automatic mode. B. -
Page 16: Squeegee Cleaning
To disassemble the brushes it is necessary 3. Turn the rubber to a new side or replace that the brushes base is in the lifted posi- tion. If it is not lifted, proceed as follows: 4. To reassemble the squeegee reverse Without the operator seated, turning the the above mentioned operations, inserting key switch clockwise, the display comes... -
Page 17: The Suction Motor Does Not Work
THE SUCTION MOTOR DOES NOT THE WATER DOES NOT COME DOWN WORK ONTO THE BRUSHES OR IS INSUFFI- 1.Verify that the key switch (5) is posi- CIENT tioned clock-wise to switch on the ma- 1.Verify that the key switch (5) is posi- chine. -
Page 18: The Machine Does Not Clean Properly
THE MACHINE DOES NOT CLEAN PROPERLY 1.The brushes do not have the suitable bristle dimension: contact the authorized technical assistance. 2.The brushes have got worn bristles. Check the brushes wear condition and eventually replace them. To replace the brushes, see instructions under paragraph “BRUSHES DISASSEM- BLY”... -
Page 19: Programmed Maintenance
PROGRAMMED MAINTENANCE TASK DAILY 20 HOURS* 200 HOURS* 500 HOURS* RECOVERY TANK CLEANING SUCTION FILTER CLEANING SOLUTION TANK FILTER CLEANING BRUSHES CLEANING BRUSHES DISASSEMBLY AND CLEANING SQUEEGEE CLEANING FRONT SQUEEGEE RUBBER REPLACEMENT REAR SQUEEGEE RUBBER REPLACEMENT SPLASH GUARD RUBBERS REPLACEMENT CHECK SQUEEGEE ADJUSTMENT SQUEEGEE HOSE CLEANING SOLUTION TANK CLEANING... - Page 20 3101 Wichita Court may or may not apply based on your specific machine. If any defect occurs, the warranty is voided if service is Fort Worth, TX 76140 attempted by non-Authorized Tornado Service Centers. Fax: 817-551-0719 or online at ©2017 Tornado Industries. All rights reserved.
Need help?
Do you have a question about the 99790 and is the answer not in the manual?
Questions and answers