Technical Details - EMPORIA VUE Installation Manual

Energy Monitor
Power supply input:
Operating conditions:
200A Current Sensors
Inside diameter:
50A Current Sensors
Inside diameter:
The Vue energy monitor and current sensors are considered a
system designed for field installation in a switch enclosure as
per section 312.8(B) of the 2017 National Electrical Code
(NEC) regarding Power Monitoring Equipment. The Vue is
considered a non-invasive load monitor (NILM) and as a
non-permanent fixture, it is acceptable to install in an
electrical panel.
The Emporia Vue Smart Home Energy Monitor contains FCC
ID: 2AS6P-EMCTV2 This device complies with part 15 of the
FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference,
and (2) this
received,including interference that may cause undesired
operation.
The Emporia Vue Smart Home Energy Monitor is Listed by UL
to meet the 62368-1 safety requirements for an I.T.E Energy
Monitor

Technical Details

Power usage:
Wi-Fi:
Max current:
Cable length:
Max current:
Cable length:
device
100-240VAC 50-60Hz
< 3 Watts
2.4 GHz 802.11b/g/n
-40° -122° F (-40° - 50° C)
0-80% RH
200A
1 m
26 mm
50A
1 m
10 mm
must accept any interference