No Empty Breaker And Two 200A Sensors - EMPORIA VUE Installation Manual

Step 7(e): No empty breaker
and two 200A sensors
Secure the
wire harness to the neutral bus bar. Turn off
a two-pole breaker and remove its wires.
Connect one of the breaker wires to the
Black harness wire and an extra wire with a
wire nut. Next, connect the other breaker
wire to the
wire with a wire nut. Then secure the extra
wires to the two breaker poles. If you do not
have a two-pole breaker, you can use two
vertically adjacent single-pole breakers.
emporiaenergy.com/support

support@emporiaenergy.com

1-844-EMPORIA (367-6742)

White and
Red harness wire and an extra
Blue wires from the