No Empty Breaker And Three 200A Sensors - EMPORIA VUE Installation Manual

Step 7(f): No empty breaker
and three 200A sensors
Secure the White wire from the wire harness
to the neutral bus bar. Turn off a three-pole
breaker and remove its wires. Connect one
of the breaker wires to the Black harness
wire and an extra wire with a wire nut. Next,
connect the other breaker wire to the Red
harness wire and an extra wire with a wire
nut. Next, connect the other breaker wire to
the Blue harness wire and an extra wire with
a wire nut. Then secure the extra wires to
the three breaker poles. If you do not have a
three-pole breaker, you can use three
vertically adjacent single-pole breakers.