Hensel C-Light D User Manual page 19

// Damaged cables and housings need to be replaced immediately by an
authorized service department.
// The continuous light equipment must be disconnected from the power
supply before replacing the metal vapor lamp.
// Do not insert objects into core ducts. Keep core ducts unobstructed
during operation to ensure proper air supply.
// Do not use continuous light equipment in explosive environments.
Keep sufficient distance from flammable materials like decorative fabrics
or paper to prevent the risk of fire.
// Continuous light equipment must be protected from rain, snow,
moisture (fog, water condensation), and splashes.
// Do not connect accessories from other manufacturers, even when
these look similar or alike.
// Continuous light equipment suspended from ceilings, traverses, or
pantographs must be double secured.
// Protect equipment which is not in use with a proper dust cover when
doing studio work that may lead to increased dust development.
// Never operate the C-Light D less than 1 m distance from flammable
materials and items.
// Do not attach filters, diffusers, or other materials directly to the lamp
head.
// Avoid blinding people due to insufficient work distances or direct
lighting, especially with highly focusing reflectors.
// Never operate the C-Light D unattended.
Attention! The front part of the C-Light D and the glass parts
become hot during use. Risk of injury! Make sure the equipment
cools off before attaching the transport cap, packaging or replacing
the lamp, or the protective dome.
18