Hensel C-Light D User Manual page 18

3 General Safety Instructions
Additional precautions need to be taken when using continuous light
lamps. The precautions described below need to be observed together
with the general rules for the use of electric appliances.
Read and observe the below listed information, the safety notes (chapter
initial operation), and the operating instructions before initial operation of
the equipment.
The continuous light lamp on hand is intended for professional use in
dry, not potentially explosive rooms, and is intended to be used to light
items that are being photographed, of for videography.
Intended Use
The equipment must not be used for any other purpose than
described above, especially not for other electrical applications.
Improper Use
Due to the explosion hazard when handling metal vapor lamps, the
equipment must only be used with the protective dome.
// Opening the equipment and making repairs must only be done by an
authorized customer service provider.
// The device must only be connected to grounded power supply
systems. Make sure the operating voltage listed on the equipment
matches your nominal line voltage before connecting it to the mains
supply.
// Only use plugs/connectors with flawless contacts. Burned or corroded
plug contacts can cause fires. Defective plugs can cause substantial
damage to the plug socket.
// To prevent damages and tripping hazards, avoid laying cables on the
floor. If this is not possible, make sure that the cables cannot be
damaged by vehicles, ladders, etc.
17