Troubleshooting; Optional Accessories - Makita CL106FD Instruction Manual

Sponge ilter
When the sponge ilter becomes dirty, clean it as
follows.
Remove the ilter.
1.
Pull out the sponge ilter from between the pillars.
2.
Clean the sponge ilter by tapping or washing. If
3.
you wash it, dry it out thoroughly before use.
Insert the sponge ilter from between the pillars
4.
and set it in the original position. Make sure that each
bottom edge of the pillar holds down the sponge ilter,
and there is no gap between the sponge ilter and suc-
tion opening.

Troubleshooting

Before asking for repairs, check the following points.
Symptom
Weak suction power
Not working
CAUTION:
Do not attempt to repair the cleaner by yourself.
To maintain product SAFETY and RELIABILITY, repairs, any other maintenance or adjustment should be performed
by Makita Authorized or Factory Service Centers, always using Makita replacement parts.
OPTIONAL
ACCESSORIES
CAUTION:
These accessories or attachments
are recommended for use with your Makita tool
speciied in this manual. The use of any other
accessories or attachments might present a risk of
injury to persons. Only use accessory or attachment
for its stated purpose.
If you need any assistance for more details regard-
ing these accessories, ask your local Makita Service
Center.
• Extension wand (Straight pipe)
• Nozzle
• Nozzle for carpet
• Shelf brush
► 1 . Sponge ilter 2. Bottom edge of pillar
Area to be investigated
Is the capsule full of dust?
Is the ilter clogged?
Is the battery cartridge exhausted ?
Is the battery cartridge exhausted ?
•
•
•
•
•
•
NOTE: Some items in the list may be included in the
tool package as standard accessories. They may
differ from country to country.
10 ENGLISH
Empty the capsule of dust.
Clean or wash the ilter.
Charge the battery cartridge.
Charge the battery cartridge.
Corner nozzle
Round brush
Flexible hose
Filter
Preilter
Makita genuine battery and charger
1
2
Fixing method