Makita CL106FD Instruction Manual page 6

1
2
► 1 . Preilter 2. Capsule
Twist the preilter in direction of the arrow to unfasten
the securing lip from the cleaner unit and then pull off
the preilter.
1
► 1 . Preilter 2. Securing lip
Clean out ine dust from the preilter. And then, pull off
the ilter and lightly tap it to remove dust.
► 1 . Filter 2. Preilter
2
1
2
Reassembly
Put on the ilter fully in position on the cleaner unit.
► 1 . Filter
Make sure the ilter is put on straight
NOTICE:
without being peeled back. If the ilter is put on
incorrectly as illustrated, dust will get into the motor
housing, and cause a motor failure.
► 1 . Filter
Install the preilter. At this time, make sure to twist the
preilter so that the securing lip is irmly locked in the
cleaner unit.
► 1 . Preilter 2. Securing lip
6 ENGLISH
1
1
1
2