Maintenance - Makita CL106FD Instruction Manual

Cleaning without nozzle
You can pick up powder and dust without nozzle.

MAINTENANCE

CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before attempting to perform inspection or
maintenance.
After use
NOTICE:
Putting the cleaner against the wall
without any other support cause the cleaner to
fall down and be damaged.
Cleaning
NOTICE:
Never use gasoline, benzine, thinner,
alcohol or the like. Discoloration, deformation or
cracks may result.
NOTICE:
Do not blow dust sticking on the
cleaner and ilters by air duster. It brings dust into
the housing and causes failure.
After washing ilters, dry them thor-
NOTICE:
oughly before use. Insuficiently dried ilters may
cause poor suction and shorten the service life of the
motor.
After cleaning ilters and sponge ilter,
NOTICE:
be sure to re-install them before use. If you use the
cleaner without ilters and sponge ilter, dust comes
into the motor housing and cause malfunction.
Cleaner body
From time to time wipe off the outside (cleaner body) of
the cleaner using a cloth dampened in soapy water.
Clean out also the suction opening and ilter mounting
area.
Filter
Wash the ilter in soapy water when it is clogged with
dust and the cleaner power becomes weak. Dry it out
thoroughly before use.
9 ENGLISH