On / Off Switch; Cleaning And Maintenance - lopital Elexo Instructions For Use Manual

4.4. On / Off switch

On the right hand side of the cover cap, there is the on /
off switch (See figure 26). If the chair is out of use for an
extended period, you are advised to turn it off. This will
prevent any unauthorised use of the chair.

5. Cleaning and maintenance

Figure 26 On / off switch.
The Elexo must be cleaned after every use, with water and regular household cleaning
agents. PUR integrated foam components with IMC coating should be rubbed clean and
disinfected. Do not use any abrasive or other aggressive cleaning products. If necessary,
the PUR components can be disinfected with a solution of 70% ethanol or propanol.
The time the products must be left on the components has a significant impact upon
the lifespan of the PUR components. As a result of the material properties of PUR,
contact with sharp objects must be avoided. This could lead to damage or tears in
the material. Finally, we would like to point out that non-critical parts of the PUR
components must also be cleaned and disinfected.
Check the wheels regularly for hairs, dust and soap residues and remove when
necessary. Maintenance and repairs to the Elexo may only be carried out by authorised
personnel.
Elexo Shower-toilet chair | Instructions for use | 39