Use Of A Bedpan Or Bucket; Charging Battery - lopital Elexo Instructions For Use Manual

3.5.2. Use of a bedpan or bucket

• If the Elexo is being used as a toilet chair, the special guides
under the seat can be used to accommodate a stainless
steel / plastic bedpan or bucket.
• The bedpan or bucket is slid in from the back of the chair
(See figure 17).
• If you are using the Lopital plastic bedpan, you must slide
it as far forwards as possible (See figure 18).
• If you are using a stainless steel bedpan or bucket, the
bedpan can be placed in 2 positions under the seat. At the
front of the seat (See figure 19) or at the back of the seat
(See figure 20).
In order to avoid injuries, we advise the carer to remove
the inlay from the seat and insert the bucket or bedpan
before the client takes a seat on the chair.
The Lopital plastic bedpan, stainless steel bedpan and
bucket must be cleaned and disinfected after use, for
example in a bedpan washing unit.
If the Lopital plastic bedpan, stainless steel bedpan or
bucket has been used, it must be removed from the
chair before the chair is moved or adjusted in height.

3.6. Charging battery

• The Elexo is an electrically driven high / low shower-toilet
chair and works on a battery.
• The charging point is located on the front of the chair, on the
blue cover on the underside of the device (See figure 21).
• If the battery is almost completely empty of charge, the
orange light on the manual control will come on; this
means that the battery needs to be charged.
• If the LED is on continuous red, the battery must be charged
immediately. The chair can then no longer be used.
• Connect the charger to the Elexo (See figure 21).
36 | Instructions for use | Elexo Shower-toilet chair
Figure 18 Lopital plastic
bedpan.
Figure 19 Stainless steel
bedpan, front.
Figure 20 Stainless steel
bedpan, back.
Figure 21 Charging point.