On / Off Switch; Cleaning And Maintenance - lopital Elexo XXL Instructions For Use Manual

Contact the technical service or Lopital's service department . E-mail: info@lopital .nl

4.4. On / off switch

On the right hand side of the cover cap, there is the on /
off switch (See figure 20) . If the chair is out of use for an
extended period, you are advised to turn it off . This will
prevent any unauthorised use of the chair .

5. Cleaning and maintenance

Figure 20 On / off switch .
The Elexo XXL must be cleaned after every use, with water and regular household
cleaning agents . PUR integrated foam components with IMC coating should be rubbed
clean and disinfected . Do not use any abrasive or other aggressive cleaning products .
If necessary, the PUR components can be disinfected with a solution of 70% ethanol or
propanol .
The time the products must be left on the components has a significant impact upon
the lifespan of the PUR components . As a result of the material properties of PUR,
contact with sharp objects must be avoided . This could lead to damage or tears in
the material . Finally, we would like to point out that non-critical parts of the PUR
components must also be cleaned and disinfected .
Check the wheels regularly for hairs, dust and soap residues and remove when
necessary . Maintenance and repairs to the Elexo XXL may only be carried out by
authorised personnel .
18 | Instructions for use | Elexo XXL Shower-toilet chair