Installation Instructions - EdilKamin ACQUATONDO 22 ROUND Installation, Use And Maintenance Manual

Important advice regarding
installation
- No. 10683
- No. 9615/90
- No. 10412:2
Before carrying out any
When assembly is completed,
The connections, commissioning and
verification of proper operation of the
fireplace
1
max.45°
22

INSTALLATION INSTRUCTIONS

External air inlet (optional)
the
An external connection with a 12,5 cm
diameter
(refer to the technical table) is absolu-
tely necessary for the thermo fireplace
to function properly and is therefore
imperative for this to be implemented.
(E)
2
crosssection throughout
(E)
E
E
fig.1
3
45°
45°
Note: The product is supplied with two
anti-corrosion discs (one on the outside
and one on the inside of the combu-
stion chamber). They must be removed
during unpacking and disposed of as
normal waste.
Chimney flues and chimneypot
fig. A 1-2-3
The fundamental characteristics of the
chimneypot are:
In addition to that mentioned above,
please consider the indications stipulated
in UNI 10683 standard, paragraph 4.2:
"connection to the smoke outlet system"
and its subsections.
NO
fig.A