Installation - Whistler WIC-5000 Owner's Manual

WIC-5000man.qxp 11/27/2012

Installation

Install Batteries
1. Remove the cover.
2. Insert four (4) new AA batteries into the appropriate slots. Proper battery
orientation is indicated on the battery compartment.
3. Replace battery cover.
1
Install the Camera with Flexible Tube
When connecting the camera tube to the
handheld unit, make sure that the keyed
ends are properly aligned. Once they are
lined up, finger tighten the knob to hold
the connector in place.
Install the Accessories
The three (3) included accessories (mirror, hook and magnet) are all attached to
the tube in the same way as illustrated below:
2:48 PM Page 3
2
Keyed end plugs
into socket
Place hook into hole at end of tube.
Place rubber ring around camera head
and hook.
3
Finger tighten
the knurled knob