Download
Share
Print this page
Stihl CombiSystem FH-KM Instruction Manual
  1. Manuals
  2. Brands
  3. Stihl Manuals
  4. Power Tool
  5. CombiSystem FH-KM
  6. Instruction manual

Stihl CombiSystem FH-KM Instruction Manual

Hide thumbs

Advertisement

Quick Links

Download this manual
Contents
CombiSystem ................................... 2
Working Techniques ......................... 3
Using the Machine .......................... 10
Approved CombiEngines ................ 10
Assembling the Unit ....................... 11
Mounting the CombiTool ................. 11
Fitting the Harness ......................... 12
Lubricating the Gearbox ................ 13
Storing the Machine ........................ 14
Main Parts ...................................... 15
Specifications ................................. 16
Maintenance and Repairs ............... 16
STIHl
FH-KM
english / USA
Allow only persons who understand the
manuals of the CombiEngine and power
scythe CombiTool to operate this power
tool combination.
To receive maximum performance and
satisfaction from your STIHL CombiTool,
it is important that you read and
understand the maintenance and safety
precautions, starting on page 4, before
using your CombiTool.
Contact your STIHL dealer or the STIHL
distributor for your area if you do not
understand any of the instructions in this
Manual.
!
Warning!
Because this power-tool has a high-
speed cutting attachment some special
safety precautions must be observed to
reduce the risk of personal injury.
Careless or improper use may cause
serious or even fatal injury.
STIHL's philosophy is to continually
improve all of its products. As a result,
engineering changes and improve-
ments are made from time to time. If the
operating characteristics or the
appearance of your attachment differs
from those described in this Manual,
please contact your STIHL dealer for
information and assistance.
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the CombiSystem FH-KM and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Stihl CombiSystem FH-KM

Summary of Contents for Stihl CombiSystem FH-KM

  • Page 1: Table Of Contents

    Fitting the Harness ......12 using your CombiTool. Starting / Stopping the Engine ..13 Contact your STIHL dealer or the STIHL Lubricating the Gearbox ....13 distributor for your area if you do not Storing the Machine ......14 understand any of the instructions in this Sharpening the Cutting Blades ..

  • Page 2: Combisystem

    Example: In the STIHL CombiSystem a number of Loosen the screw (1) different CombiEngines and CombiTools can be combined to produce a power Lever (2) ...

  • Page 3: Equipment And Features

    STIHL dealer for environment. assistance. Have your STIHL dealer show you how to operate your power tool. Observe all Therefore, we cannot be responsible for applicable local safety regulations, changes, modifications or standards and ordinances.
  • Page 4 / USA Most of these safety precautions and Warning! Warning! warnings apply to the use of all STIHL The use of any power scythe may be power scythes. Different models may Prolonged use of a power tool (or other hazardous.
  • Page 5 AV buffers will tend to have standard). To reduce the risk of injury to unconfined long hair or higher vibration levels. your face STIHL recommends that you anything that could – Maintain a firm grip at all times, but...
  • Page 6 Fueling specified in your owner's manual for expressly approved by STIHL for use proper control and less fatigue in Your STIHL power scythe uses an oil- with the specific STIHL power tool operation. gasoline mixture for fuel. For further models are authorized. Although certain...
  • Page 7 english / USA Warning! Warning! Warning! Gasoline is an extremely To reduce the risk of injury from loss of Use of this product can generate dust flammable fuel. If spilled control, be absolutely sure that the and fumes containing chemicals known and ignited by a spark or cutting tool is clear of you and all other to cause respiratory disease, cancer,...
  • Page 8 english / USA Always work calmly and carefully, stay Warning! alert so as not to endanger others. If the Do not overreach. Keep proper footing cutter blades become jammed by thick and balance at all times. Special care branches or any other obstruction, must be taken in slippery conditions (wet switch off the engine immediately before ground, snow) and in difficult, overgrown...
  • Page 9 Have The cutter blades tend to run on for a or individual. However if you claim short period after the throttle trigger is such work performed at your STIHL warranty coverage for a component released (flywheel effect). service shop only.

  • Page 10: Using The Machine

    (garbage models: can) - they can be Cutting Technique composted! STIHL FS 55 RT, FS 83 RT and Working position and method are FS 85 RT exactly the same as for a brushcutter. For use of the barrier bar observe The cutter bar is swept to and fro in an instructions in owner’s manual of...

  • Page 11: Assembling The Unit

    english / USA Assembling the Unit Mounting the CombiTool Mounting the Gearbox Once the end of the drive tube is Engage lug (1) on drive tube in inserted beyond the slot in the slot (2) in the coupling sleeve and Loosen the clamp screws (9).

  • Page 12: Adjusting Cutter Bar Angle

    english / USA Adjusting Cutter Bar Angle Fitting the Harness The angle of the cutter bar relative to the shaft can be adjusted to 8 positions between 0° (straight) and 90° (right angle). The additional settings increase the versatility of the unit. Adjusting cutter bar angle Shut off the engine.

  • Page 13: Starting / Stopping The Engine

    ( h ) to STOP – $ or move the stop switch to $ Place the unit on the ground: It must Use STIHL gear lubricant for hedge rest securely on the engine support trimmers for lubrication of the blade and the gearbox.

  • Page 14: Storing The Machine

    It is best to have the cutting blades If the CombiTool is stored resharpened by your STIHL dealer on a separately, fit the protective cap on workshop sharpener. the drive tube to avoid dirt getting Do not operate your unit with dull or into the coupling.

  • Page 15: Main Parts

    english / USA Main Parts Definitions 1. Cutting Blades Steel blades for cutting hedges and shrubs. 2. Blade Scabbard Covers and protects cutting blades when hedge cutter is not in use. 3. Blade Drive Gear Converts rotary movement of angle drive into reciprocating movement of cutting blades.

  • Page 16: Specifications

    STlHL parts symbol ( STIHL gear lubricant for hedge trimmers The symbol may appear alone on small STIHL gear lubricant for brushcutters parts. STIHL Resin solvent Contact your STIHL dealer for the latest information on these and other special accessories. FH-KM...