Checking The Operation; Type Settings; Basic Settings - Canon Super G3 3rd Line FAX Board-AE1 Service Manual

20) Affix the following FAX Approval Label .
NOTE:
This step is only for Taiwan.
CAUTION:
• Be sure to affix it near the rating name plate.
• Be sure to affix it to a label-free area shown in the figure.
• Be sure to affix it not to overlap with other labels.
21) Connect the power plug to the outlet.
22) Turn ON the main power switch.
6
Installation > Installation Procedure > Checking the Operation > Basic Settings Installation
F-6-66
6 Installation > Installation Procedure > Checking the Operation > Basic Settings Installation

Checking the Operation

■ Type Settings

Select the country/region of the FAX Board in Service Mode: FAX> TYPE> TYPE This setting
performs the parameter settings to match the communication specification of the country/
region.
1) Set the TYPE of country/region to install this machine, and then press OK.
Service Mode> FAX> TYPE> TYPE
2) Turn OFF/ON the main power switch to enable this setting.

■ Basic Settings

NOTE:
When "System Manager Information Settings" is set, be sure to follow the direction of
user administrator in order to log in as an administrator.
In this section, make only minimum settings required for FAX communication.
1) Set the user telephone number.
[Settings/Registration]> [Function Settings]> [Send]> [Fax Settings]> [Set Line]> [Line 3]/
[Line 4]> [Register User Telephone No.]> Enter FAX number> [OK]
2) Set the type of telephone line.
[Settings/Registration]> [Function Settings]> [Send]> [Fax Settings]> [Set Line]> [Line 3]/
[Line 4]> [Select Line Type]> Select the line type to connect> [OK]
3) Turn OFF/ON the main power switch after setting the user telephone numbers and the type
of telephone line.
6-23
6-23