Sssw-Sw25; Sssw-Sw26 - Canon Super G3 3rd Line FAX Board-AE1 Service Manual

5
Service Mode Service Mode > Setting of Bit Switch (SSSW) > Bit Switch Composition > SSSW-SW26

■ SSSW-SW25

● Functional Construction
Bit Function
0 transmission telephone number indicated report
1 not used
2 not used
3 not used
4 not used
5 not used
6 not used
7 not used
Detailed Discussions of Bit 0
Use it to select the transmission telephone number indicated on the report at the end of
transmission.
caller's number: indicates the telephone number of the caller on the report.
number of other party: indicates the telephone number (CSI signal data) sent from the other
part on the report.
5 Service Mode > Setting of Bit Switch (SSSW) > Bit Switch Composition > SSSW-SW26 Service Mode
1 0
other party's caller's
- -
- -
- -
- -
- -
- -
- -
T-5-14

■ SSSW-SW26

● Functional Construction
Bit Function
0 not used
1 not used
2 confirmation screen for broadcasting
3 not used
4 not used
5 not used
6 not used
7 error report at time of transmission suspension do not generate
Detailed Discussions of Bit 2
Use it to enable/disable indication of a confirmation message before broadcasting in
consideration of a mistake during input of addresses.
Detailed Discussions of Bit 7
Use it to enable/disable generation of an error report in response to a press on the Stop key
to suspend transmission.
5-10
1 0
- -
- -
display do not display
- -
- -
- -
- -
generate
T-5-15
5-10