Soft Drop - Fastcorp EVOLUTION FS-01 Setup And User Manual

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | + 561-391-7200
d. Hold Lost Credit - Funds that could not be returned to a customer
during a vend are available for another transaction.
e. Multi Vend - Change is not automatically returned after a transaction,
but held for another transaction or until coin return is pressed.
f. Lev 2 Coin Mech - When set to "N" (default), the coin mechanism will
determine optimum change. If set to "Y", the VMC will determine what
coins to give back as change, regardless of the capabilities of the coin
mechanism. Power to the VMC must be cycled off and back on after
changing this setting.
g. Instant Reval - When set to "Y" (default), a stored value cashless device
can receive revaluation credit as soon as coin or cash is inserted into the
vendor. When option is set to "N", revaluation occurs when a major action
is taken such as pressing the coin return. This option is only necessary
for older cashless systems where the number of revaluations per credit
device is limited.
Display
23) MDB Settings
*=Next D = Back
Force Vend
*=Change
No Cheat
*=Change
Change Bill
*=Change
Hld Lost Crdt
*=Change
Multi-Vend
*=Change
Lev2 Coin Mech
*=Change
Instant Reval
*=Change
24) Soft Drop – Allows the Vacuum Pump to lower the product before it is
released into the Delivery Bin. The release height may be adjusted and Soft
Drop may be turned "ON" or turned "OFF".

24) Soft Drop

*=Next D=Back
Use Up / Down Keys
*=Turn Off
Saved
Programming Instructions
a) Press the #=Yes key to enter Menu
#=Yes Option.
N b) Press *=Change to change setting
and # to accept choice.
#=Accept
Y c) Press *=Change to change setting
and # to accept choice.
#=Accept
N d) Press *=Change to change setting
and # to accept choice.
#=Accept
Y e) Press *=Change to change setting
and # to accept choice.
#=Accept
N f) Press *=Change to change setting
and # to accept choice.
#=Accept
N g) Press *=Change to change setting
and # to accept choice.
#=Accept
Y h) Press *=Change to change setting
and # to accept choice.
#=Accept
a) Press the #=Yes key to enter Menu
#=Yes Option.
b) Use Service Keypad up/down keys
#=Accept to adjust soft drop level and press #=
Accept.
c) Press * to turn function "OFF".
New Soft Drop release height is saved.
- 40