Program Version; Display Language; Line Mode; Machine Serial Number - Fastcorp EVOLUTION FS-01 Setup And User Manual

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | + 561-391-7200
14) PROGRAM VERSION - Shows the date and software version installed.
Display

14) PROGRAM VERSION

*=Next D = Back
FASTCORP GEN 4
UNIVERSAL vX.XXY
15) DISPLAY LANGUAGE - Allows the programmer to change the language of
all external text and all programming. English, German and Spanish languages
reside in the software. One additional language translation may be added to the
existing software subject to availability.
Display

15) DISPLAY LANGUAGE

*=Next D = Back
English
*=Next D=Back
16) LINE MODE - Line mode shortens the time between vends by holding the
freezer door open between vend cycles. If there is no activity for 20 seconds the
Freezer Lid will close. (Default setting is OFF).
Display

16) LINE MODE

*=Next D = Back
LINE MODE: ON
*=Next D=Back
17) MACHINE SERIAL NUMBER - Program the serial number of the vendor into
the VMC memory so that an external data retrieval unit (DEX) can include the
serial number when uploading sales information. Up to 10 digits are allowed.
Defaults to VMC Board serial number.
Display
17) Machine Serial #
*=Next D=Back
SN
*-Exit
MACHINE SN SAVED
a) Press the #=Yes key to enter Menu
Option.
#=Yes
b) Program version (X.XX) and revision
(Y) are displayed. Press any key to
continue.
a) Press the #=Yes key to enter Menu
#=Yes Option.
b) Press *=Next to scroll through
language choices. Press #=Yes to
accept.
#=Yes
a) Press the #=Yes key to enter Menu
Option.
#=Yes
b) Press the *=Next key to scroll
between options.
#=Yes
c) Press the #=Yes key to confirm the
selection.
a) Press the #=Yes key to enter Menu
#=Yes Option.
0000000000 b) Enter 10 digit ID number (asset #,
#-Save machine serial #, etc.). Press #-Save.
c) Save serial number is confirmed.
- 37
Programming Instructions
Programming Instructions
Programming Instructions
Programming Instructions