Advertisement
Installation Reference
Installing an Outdoor Optical Splitter
5
Route in and secure fibers.
Route the lead nylon of outdoor fibers through fiber
fixing holes, fix the lead nylon, and cut off any excess.
Use hose clamps to secure outdoor fibers on the
appropriate hooks.
56/57 >>
Remove dustproof caps and insert fiber connectors into appropriate adapters
according to labels.
Port in the
Interconnected
Interconnected Port
Fiber
Equipment
Distribution
Area
101
Main RTN 310
Receive GE port on the main OptiX RTN 310
201
Transmit GE port on the main OptiX RTN 310
102
Standby RTN
Receive GE port on the standby OptiX RTN 310
310
202
Transmit GE port on the standby OptiX RTN 310
IN2
Customer
Receive GE port on the customer equipment
equipment
IN1
Transmit GE port on the customer equipment
Picture showing fiber codes in the fiber
distribution area
Fix the fiber metal jacket in the fiber routing clips.
Wrap outdoor fibers with three layers of waterproof tape. Ensure that the taped fiber
is a close fit in the fiber trough so that the outdoor optical splitter is properly sealed
and waterproofed.
Sealing
positions
Do not stretch waterproof tapes when using them to wrap
outdoor fibers.
Main RTN 310
Standby RTN 310
Customer
equipment
Three layers of
waterproof tape
Advertisement
