Advertisement
Installation Reference
Installing the RTN 310
Change the polarization direction of a single-polarized antenna to horizontal.
Refer to the antenna installation guide for information on how to
change the polarization direction.
Change the polarization direction of a dual-polarized antenna.
Refer to the antenna installation guide for information on how to
change the polarization direction.
Dual-polarized antenna with a
Dual-polarized antenna with a
vertically-polarized feed on the left
horizontally-polarized feed on the left
Install the RTN 310 on the antenna. The antenna port of the RTN 310 can adapt to the polarization direction of the antenna.
Correct
Vertical
34/35 >>
V (default)
Points to H mark
Incorrect
The antenna port of the RTN 310 can adapt to the polarization
direction of the antenna. There is no need to manually change
the polarization direction of the RTN 310.
CAUTION
After finishing the installation, hold the RTN 310's
handles with your hands and turn it to check whether
it is installed securely.
Apply petroleum jelly around the exterior side ① of the feed. Do not apply petroleum jelly to the end face ② of the feed.
②
Install a hybrid coupler on the antenna.
Apply petroleum jelly to
the O ring ①. Do not
apply petroleum jelly on
the end face ② of the
antenna port.
Before installing the RTN 310, remove the protective
cover and film on the antenna port. Otherwise,
signal transmission will be affected.
①
Install RTN 310s onto the hybrid coupler.
①
②
CAUTION
After finishing the installation, hold the RTN 310's
handles with your hands and turn it to check whether
it is installed securely.
Advertisement
