Advertisement
Installation Reference
Installing an Outdoor Optical Splitter
4
Optional: Install the outdoor optical splitter on a pole.
4.1 Install the mounting assembly on a pole.
Loosen the screw on the hose clamp.
Install the mounting assembly on the pole.
Hose clamp
Assembly
Tighten the
screw on the
hose clamp.
Route in and secure fibers.
5
Determine the holes through which fibers will be routed in and remove the plugs.
Outlet for the fiber
Outlet for the fiber connected to
connected to the
the main RTN 310
standby RTN 310
54/55 >>
Complete installation of the mounting
assembly.
Plugs
Outlet for the fiber connected to
the customer equipment
4.2 Secure the outdoor optical splitter on the mounting assembly and tighten the lower hose clamp.
Secure the upper part and then the lower part of the
Tighten the
outdoor optical splitter.
hose clamp.
Partially tighten
the hose clamp.
Install hose clamps onto
outdoor fibers.
Hooks to
fix hose
clamps
Outdoor fiber trough
Tighten the hose
clamp.
Hose
clamp
Advertisement
